D-CAST RESIN

This COLORBERRY D-CAST RESIN is more than perfect for your "smaller" casting projects like letters, balls, jewelry, coasters, etc.
It is a super clear resin with a venting additive - so most air bubbles will disappear on their own after casting.
STIR IT VERY GENTLY - to avoid air bubbles in the mixture (about 5 minutes mixing time if you stir it very gently).
Mixing: 1 : 1 (by volume!)
Working time: 30 minutes
Demolding possible: after 12 hours

Depending on the room temperature you can pour up to 10x10x10 cm (but in this case make sure that the room temperature is not above 20°C) because of the exothermic reaction and do not add too much heat with a Bunsen burner / heat gun. Better use our BUBBLEBYE.

4000 ml = 2000 ml hardener + 2000 ml resin

500 ml = 250 ml hardener + 250 ml resin

SDS wird bald verfügbar sein.