JESIN -3 kg, the ultimate pouring fun!

The ultimate pouring fun with JESIN!

This material will show u new, eco-friendly and non-toxic ways of pouring / casting in silicone molds. This is super easy to use und the Ultra fun working with it.

Basically:

JESIN is a 2-component polymer gypsum system consisting of a gypsum base component (the powder) and a water-based acrylic resin (the liquid). The polymeric cross-linking of the gypsum crystals with the acrylate results in a very high strength.

Material properties:

• shelf-life of approx. 18 months with correct storage
• paintable, machinable (drilling, milling, grinding, polishing etc.)
• UV-resistant
• flame retardant (EN 13501-1 and ASTM E84-15b)
• no shrinkage
• low heat development during curing process (max. 40°C)
• environmentally friendly
• solvent-free

Working instructions:

1. Just mix powder and liquid (2:1 by weight – 2 parts powder + 1 part liquid)
2. If u wanna add color, just use the COLORBERRY LIQU-MENTS (a few drops are enough)
3. Pour it in a silicone mold – working time 20 min
4. Wait until it cured (approx 20 min)
5. Unmold it and let it rest for another 24 hours

Creative Ideas:

• Add Gold leaf
• Do Speckle
• Pour Marble
• Create Terrazzo

Technical data of JESIN:

• Shore: D 80
• Color: creamy white
• Density dry: 1,67 kg/liter
• Density wet: 1,75 kg/liter
• Compressive strength: 30 MPa
• Flexural strength: 6 MPa (3-point bending)
• Hardness: Shore D 80
• Expansion: +/- 0.1

PLEASE SEE BELOW A MINI-TUTORIAL HOW TO WORK WITH IT :)

(100 gr = 1,26 Euro netto)